Skip to main content Skip to search Skip to main navigation
Register
Help and Contact
FAQs and Shipping Information Guaranteed Usable Until Date 5% Discount for PD Plus Customers Payment Options
FAQs and Shipping Information

Learn more
Guaranteed Usable Until Date

Learn more
5% Discount for PD Plus Customers

Learn more
Payment Options

Learn more

Re-Order in a Flash - Just Log In

If you’ve ordered from us before, you can repeat your last order with a single click. Log in to enjoy a faster checkout, personalised recommendations, and access to your order history.

CH EN
CHF
Hero slider item

Surgical Masks vs. FFP Masks

This page offers a quick and comprehensible overview of the different mask types, the most important differences and the applicable standards.


Differences Between FFP Classes

The filtering facepiece respirator (FFP) must meet the requirements of DIN EN 149 and is classified into three categories based on filter efficiency. The higher the protection class, the stronger the filter and the greater the level of protection. Generally, FFP masks can be distinguished between those for self-protection (with an exhalation valve) and those for both self- and source protection (without a valve). For self- and source protection, we offer the FFP2 Respirator Mask and the FFP3 Respirator Mask. If you only need personal protection, we recommend the FFP3 Mask with Valve, which offers excellent self-protection with high wearing comfort.


EN 14683
Type I
EN 14683
Type II
EN 14683
Type IIR
Bacterial Filtration Efficiency ≥ 95 % ≥ 98 % ≥ 98 %
Increased Resistance to Liquids and Aerosols No No Yes
Breathing Resistance < 40 Pa/cm² < 40 Pa/cm² < 60 Pa/cm²
Spray Resistance Pressure – – ≥ 120 mmHg

Frequently asked questions about FFP masks

What is the purpose of an FFP mask?

The FFP mask protects the wearer from inhaling smallest airborne particles, droplets and aerosols.


Who is the FFP mask suitable for?

The mask is suitable for everyone who is exposed to an increased risk of infection through direct contact with demonstrably or potentially infected people. FFP masks should also be worn in treatment situations where aerosol formation is to be expected, e.g. during aspirations.

It should be noted that FFP masks with exhale valve protect the wearer but not the patient. The inhaled air is filtered through various layers, while the exhaled air escapes through the valve and remains unfiltered.


Does the mask seal?

If used correctly, the mask seals well or minimises leakage. The total leakage of the mask must not exceed 11% in FFP2 masks and 5% in FF3 masks.


How long can the mask be worn?

In general, the FFP mask can be worn for up to 8 hours, i.e. the entire shift.


Are there any differences between FFP masks?

Yes, filtering facepieces are divided into three protection levels (FFP1 to FFP3). Additionally, there are masks with and without valve. For comfort, one can also choose between foldable and hard-shell masks.


Which standards must be met?

To sell FFP masks in Europe, the masks must comply with DIN EN 149. They are tested by an independent inspection authority. The CE mark and the identification number of the inspection authority (notified body) confirm that the standard is met.


What are the advantages of FFP masks?

If used correctly, FFP masks offer a high level of protection for the wearer (and the patient, if used without a valve).


FFP masks and related products

FFP masks are half masks that meet the requirements of the DIN EN 149. They are marked with the CE mark and the identification number of the notified body. The filter performance is tested by the inspection authority and documented with the corresponding test report.

The European FFP2 mask complies with the American standard N95 or N95NIOSH, which may also be used in Europe due to the corona pandemic and the high requirements for their certification.

KN95 are masks that have been produced according to the Chinese standard.

FFP masks in our shop

Order FFP masks
FFP2 respiratory mask without valve
FFP2 Mask
From CHF 0.07 net
Your PLUS customer savings CHF 0.00 net
In stock
Packaging unit: 1 PC
FFP3 protective mask with valve, compliant with DIN EN 149
FFP3 Mask with Valve
From CHF 1.99 net
Your PLUS customer savings CHF 0.10 net
Item is currently being restocked Your order will be dispatched as quickly as possible
Packaging unit: 1 PC
Foldable FFP2 mask without valve for protection against dust, aerosols and particles up to 0.6 µm
Foldable FFP2 Mask unvalved
From CHF 0.19 net
Your PLUS customer savings CHF 0.01 net
In stock
Packaging unit: 1 PC
FFP2 respirator mask with flexible nose clip and 2 elastic headbands to keep the mask in place
FFP2 Respirator Mask
From CHF 0.06 net
CHF 0.62 net short best before date
Your PLUS customer savings CHF 0.00 net
In stock
Packaging unit: 1 PC
Coloured FFP2 mask, complies with DIN EN149:2001+A1:2009, with at least 94 % filter performance
Coloured FFP2 Mask
From CHF 0.24 net
Your PLUS customer savings CHF 0.01 net
In stock
Packaging unit: 1 PC
uvex silv-Air classic 3310 FFP3 Mask With exhalation valve
uvex silv-Air classic 3310 FFP3 Mask
From CHF 4.29 net
Your PLUS customer savings CHF 0.21 net
In stock
Packaging unit: 1 PC
FFP3 Maske uvex silv-Air mit umlaufender, weicher Dichtlippe und Ausatemventil
uvex silv-Air FFP3 Mask
From CHF 4.29 net
Your PLUS customer savings CHF 0.21 net
In stock
Packaging unit: 1 PC

Features of the different types of surgical masks

The surgical face mask, also known as a medical face mask or mouth-nose protection mask, is a medical device and regulated under medical device law. It must comply with the DIN EN 14683:2019-6 standard and is available in different types. The differences are shown in the table below.

EN 14683 Type I EN 14683 Type II EN 14683 Type IIR
Bacterial Filtration Efficiency ≥ 95 % ≥ 98 % ≥ 98 %
Increased Resistance to Liquids and Aerosols No No Yes
Breathing Resistance < 40 Pa/cm² < 40 Pa/cm² < 60 Pa/cm²
Spray Resistance Pressure – – ≥ 120 mmHg


At Praxisdienst, you can order the Type II Surgical Mask and the Type IIR Surgical Mask, both featuring practical elastic ear loops and individually adjustable nose clips for a secure and comfortable fit.

Frequently asked questions about surgical masks

What is the purpose of a surgical mask?

Surgical mask are primarily used to protect the wearer’s environment by retaining exhaled droplets. If the mask fits correctly and reasonably tightly, it also serves to a small extend to protect the wearer from droplets in the ambient air. Type II R masks also retain splashes of body fluids and contaminated liquids to a certain extend.


Who is the surgical mask suitable for?

The surgical mask can be worn wherever the surroundings must be protected by exhaled emissions. It is also suitable for areas where the risk of infection through droplets is rather low.


Does the mask seal completely?

No, it does not seal completely and does not provide reliable self-protection.


How long can the mask be worn?

Surgical masks are disposable products. When it is worn, the mask becomes wet and no longer provides protection. Surgical masks should therefore be thrown away as soon as they become soaked or after 2 hours at the latest.


Are there differences between surgical masks?

Yes, there are significant differences between Type I, Type II and Type II R surgical masks. The distinguishing features are the filter performance against bacteria (BFE), the pressure of the spray water resistance, the resistance against liquid splashes and the breathing resistance.


Which standards must be met?

The requirements for surgical masks used within the EU can be found in the standard EN 14683, which is certified through the manufacturer and confirmed by the CE mark. Type II and Type IIR masks are also marked accordingly.


Which advantages does the surgical mask offer?

Surgical masks offer a high filter performance and thus protects the wearer’s surroundings. Since the breathing resistance of surgical masks is lower, they are more comfortable to wear than FFP masks and can be worn even during strenuous activities.

Surgical masks in our shop

Order surgical masks
Non-woven surgical mask with long nose clip, three-ply
Surgical Mask with Elastic Earloops, 3 ply
From CHF 4.29 net
Your PLUS customer savings CHF 0.11 net
In stock
Packaging unit: 50 PC
Surgical face masks with 98 % bacteria filtering capacity
Surgical Mask, 3-ply
From CHF 4.99 net
Your PLUS customer savings CHF 0.20 net
In stock
Packaging unit: 50 PC
Teqler 3-ply black surgical masks with high bacteria filtration capacity
Teqler Surgical Mask, black
CHF 3.49 net
CHF 3.99 net short best before date
Your PLUS customer savings CHF 0.17 net
In stock
Packaging unit: 50 PC
Euronda Monoart Mundschutz in vielen verschiedenen Farben erhältlich
Euronda Monoart® Surgical Mask
CHF 8.79 net
Your PLUS customer savings CHF 0.44 net
In stock
Packaging unit: 50 PC

Please note

This information is intended professional users and does not concern community masks and other makeshift masks without approval or proof of effectiveness.