The KIRSCH LABO 288 Laboratory Refrigerator with PRO-ACTIVE control is compliant with DIN 13277and is used for the reliable and safe cooling of laboratory samples. Performance data is permanently and proactively monitored. In addition, efficient recirculating air-cooling ensures even temperature control in the interior with a low temperature gradient between the different storage locations. In case of power failure or malfunction, a visual and at the same time acoustic alarm indicates the malfunction. In the event of a power failure, the monitoring unit remains in operation for a further 30 hours thanks to a rechargeable battery. If required, it is possible to set up alarm forwarding, e.g. to a mobile phone. Thanks to the minimum and maximum temperature memory, there is no need for time-consuming documentation of this data. They can be quickly read and archived.
Product Details
KIRSCH Laboratory Refrigerator LABO 288
Features PRO-ACTIVE control
Permanent and proactive monitoring of performance data
With 2 standard PT-1000 sensors
Efficient convection cooling for even temperature regulation
Low temperature gradient between the storage locations
Visual and acoustic alarm signal
Battery operation of the monitoring unit for approx. 30 h in case of power failure
Door opening alarm after 60 seconds
Automatic defrosting and melt water evaporation
Freeze protection against minus temperatures
Statically ventilated refrigerating machine
Housing made of galvanised sheet steel (rust-protected)
With white and scratch-resistant powder coating
Adjustable feet in the front area
Easy levelling of uneven floors possible
Interior lined with smooth aluminium with coating
Adjustable slats (15 mm) for flexible interior partitioning
Including three plastic-coated grates
Energy-saving insulation, 55 mm thick
Lockable door with replaceable magnetic sealing frame
Interchangeable door hinge (with right-hand hinge as standard)
Compliant with DIN 13277
Plug cable length: approx. 2.8 m
Differences Between PRO-ACTIVE and ULTIMATE
PRO-ACTIVE
ULTIMATE
Display
Membrane keypad with digital temperature display and min./max. temperature memory.
Capacitive touch display in elegant glass design. Graphic display of the temperature curve and the min/max temperature.
Temperature Setting
Protected by key switch.
Protected by RFID/password. Control and display sensor protected by safety barrier.
Alarm Forwarding
Via potential-free contact (e.g. on mobile phone with GSM module or connection to central control technology)
Via network and potential-free contact (e.g. connection to central control technology).
Data Documentation
Reading via USB interface using USB stick and KIRSCH Datanet software.
Digital - can be read via network (PC-KIT-NET) and KIRSCH Datanet software.
Access Control
No.
Yes - with log function and device documentation.
Technical Specifications
Capacity: 280 litres
Temperature setting: approx. 0 to +15 °C*
Voltage: 220 - 240 V, 50/60 Hz
Power input: 88 watts
Standard consumption: 0.68 kWh/24 h
Permissible ambient temperature: +10 °C to +38 °C
Heat emission (max.): 165 watts
Outer dimensions (incl. wall clearance & door handle): 67 x 72 x 132 cm (W x D x H)
Inner dimensions: 53 x 50 x 100 cm (W x D x H)
Outer dimensions with door open at 90°: 67 x 130 cm (W x D)
Grate size: 52 x 39 cm (W x D)*
Maximum load per grate: 40 kg
Weight: net 71 kg, gross 83 kg
*Values can deviate minimally depending on the variant (see product data sheet)
